Worn, stained, or pitted concrete doesn't always need replacement. We resurface slabs, decks, and walkways with overlays that bond tight and look brand new.
Concrete resurfacing in Fort Lauderdale gives worn, weathered, and surface-damaged concrete a new life — without the cost, disruption, and waste of full removal and replacement. South Florida's intense UV, heavy rainfall, and foot and vehicle traffic wear concrete surfaces down over time, leaving them stained, pitted, cracked, and visually dated. At Planet Construction FL, concrete resurfacing delivers a durable, attractive new surface over the existing slab — restoring both appearance and surface integrity at a fraction of what replacement would cost.
Full 360° rebar undercut, mechanical rust descaling to bare metal, and cathodic zinc primer application.
Engineered multi-tier shoring towers safely support live and dead superstructure loads prior to chipping.
Turnkey threshold special inspections, concrete cylinder break tests, and final municipal certificate of completion.
Slabs that look "done" often aren't. Surface wear, staining, pitting, and minor cracking are usually treated as full replacement jobs — costing two to three times what the actual damage warrants. Replacement also means demolition, downtime, and a long return to use, none of which are necessary for slabs that are still structurally sound underneath.
We profile the existing slab, repair any underlying damage, and apply a bonded overlay engineered for the conditions. The result is a new wear surface that bonds tight, resists wear and weather, and looks brand new — without the cost, mess, or downtime of full replacement. Driveways, decks, walkways, and commercial slabs all qualify.
Concrete resurfacing is the application of a new, thin concrete overlay or polymer-modified topping over an existing concrete slab. The overlay bonds chemically and mechanically to the prepared substrate, creating a new surface that conceals staining, minor cracking, surface erosion, and texture deterioration. Resurfacing overlays range from basic smooth-finish toppings to decorative systems that replicate stone, slate, tile, and wood textures. The key difference between resurfacing and replacement: the existing slab stays in place, eliminating the demolition, hauling, and base re-preparation that make replacement expensive and time-consuming. Resurfacing is the right choice when the existing slab is structurally sound — just worn, stained, or visually deteriorated at the surface level.
SPECIALIZED DIVISION
Comprehensive repair protocols meeting Florida Building Code and structural engineering specifications.
Request Detailed Quote →
SURFACE PROTECTION
Seamless elastomeric barriers protecting underlying assemblies from South Florida salt-air and rain penetration.
View Waterproofing Options →
STRUCTURAL FRAMES
Engineered hydraulic load transfer towers, steel splice welds, and polymer micro-concrete jacketing.
Inquire About Shoring →
QUALITY CONTROL
On-site special inspector reviews, cylinder breaks, pull-off adhesion testing, and certificate of completion.
Request Engineering Audit →
EXTERIOR ENVELOPE
Stucco crack isolation, urethane expansion joint renewal, and coastal salt corrosion shielding systems.
Explore Facade Services →
SUBTERRANEAN DEFENSE
Hydrophobic polyurethane and epoxy injection stopping subterranean water intrusion in elevator pits and foundations.
Request Leak Diagnostic →Resurfacing is appropriate when the existing concrete slab is structurally intact — the subgrade is stable, there is no significant settlement or heaving, and any cracking is surface-level rather than through-cracks with differential movement. If the slab has settled sections with elevation changes exceeding half an inch, active drainage problems, or widespread structural cracking with displacement, those issues need to be addressed before or instead of resurfacing. Planet Construction FL assesses each slab honestly: we'll tell you when resurfacing is the right answer, and when it isn't. Applying an overlay over a fundamentally compromised slab is a short-lived fix that doesn't serve the property owner's long-term interest.
Concrete structural restorations intersect with waterproofing membranes, expansion joints, and municipal milestone permits. Dividing trades creates delays, finger-pointing, and voided warranties.
Separate concrete patchers, painters, and coating contractors frequently void each other's warranties. If water intrusion recurs, the waterproofer blames the concrete mortar while the mason blames the sealant.
John Kraja directly manages the entire structural restoration under dual state licenses (CGC1517295 & CCC1329271). In-house crews chip spalls, treat rebar, cast structural mortars, and apply warranted traffic coatings under single-source accountability.
We pull permits directly across Fort Lauderdale, Pompano Beach, Hollywood, Boca Raton, and Weston building departments. We coordinate engineering special inspections daily to prevent costly stop-work delays.
Concrete resurfacing isn't just a utilitarian surface repair — it's a genuine design upgrade opportunity. Planet Construction FL offers a range of decorative overlay systems for Fort Lauderdale property owners looking to elevate their driveways, pool decks, walkways, and patio surfaces. Stamped overlay systems replicate brick, slate, cobblestone, and flagstone patterns in the new concrete surface. Microtopping and skim coat systems create smooth, modern surfaces suitable for interior and exterior applications. Spray texture overlays apply a slip-resistant, uniform texture ideal for pool decks and walkways. Acid-staining or water-based staining of the overlay surface produces a rich, variegated color effect that mimics natural stone. All decorative systems are sealed for UV stability and durability in South Florida's climate.
Technicians review engineer reports and conduct acoustical hammer sounding surveys to map hidden subsurface delaminations.
Erecting calibrated multi-tier hydraulic shoring towers and pulling municipal building department permits across South Florida.
Chipping concrete to 3/4-inch clearance around oxidized steel, sandblasting to bare metal (SSPC-SP 10), and applying cathodic zinc primer.
Scrubbing cementitious bonding slurry into SSD substrate, casting high-strength micro-concrete (>6,500 PSI), and controlling wet curing.
Applying elastomeric waterproofing barrier coats, performing flood testing, and securing final municipal building department permit sign-off.
Our concrete resurfacing services cover a wide range of surface types throughout South Florida. Residential driveways that have developed surface staining, cracking, and erosion are ideal candidates — a decorative overlay transforms curb appeal dramatically. Pool decks that have faded, pitted, or cracked receive resurfacing with non-slip, UV-stable, cool-touch overlay systems designed for the poolside environment. Warehouse and retail floors, parking lot entrances, and pedestrian plazas receive industrial-grade overlays that restore the surface while accommodating continued vehicle and foot traffic. Walkways and paths in HOA communities and condominium properties are resurfaced to restore uniformity and eliminate trip hazards. If it's a concrete surface, we can restore it.
Phased construction logistics, resident notices, reserve study alignment, and direct engineer of record milestone recertification sign-offs.
Documented case studies showcasing engineered structural repairs across Broward and Palm Beach County properties.
Full-depth cantilevered balcony spall excavations, railing pocket re-anchoring, and multi-layer pedestrian traffic coatings for 48 units.
Extensive rebar replacement, micro-concrete form-and-pour jackets, and salt corrosion shielding for coastal high-rise assemblies.
Hydro-demolition of 6,500 sq ft delaminated deck concrete, heavy vehicular expansion joints, and polyurethane traffic membranes.
Clear answers regarding engineering specifications, municipal code compliance, and structural concrete restoration standards.
Standard polymer-modified concrete overlays are applied at 3/8 to 3/4 inch thick. Microtopping systems for smooth, modern finishes can be as thin as 1/16 inch. The overlay thickness is specified based on the degree of surface correction needed, the traffic type the surface receives, and the decorative system being applied. Thicker overlays provide greater surface correction capability and durability under heavy traffic.
A properly installed concrete overlay on a sound substrate lasts 10–20 years in South Florida's climate with appropriate maintenance. The key maintenance items are periodic resealing every 2–3 years for decorative exterior surfaces and prompt repair of any edge chips or cracks before they allow moisture to undermine the overlay bond. UV-stable sealer selection is critical in Fort Lauderdale's intense sun environment.
Yes — minor cracks can be filled and bridged by the overlay system. Active cracks that move with temperature changes need to be treated with flexible crack filler before overlay application, and a crack isolation membrane may be recommended to prevent reflective cracking through the new surface. Wide cracks with differential displacement indicate slab movement that should be addressed before resurfacing.
Most polymer-modified overlays are ready for foot traffic within 24 hours and vehicle traffic within 48–72 hours, depending on the specific product and ambient temperature during curing. Pool deck overlays require full cure before pool water contact — typically 48–72 hours. We provide specific return-to-service guidance at project completion based on the products and conditions of your specific project.
Free resurfacing quote with photos and clear scope. We'll show you exactly what your slab can become — without the cost of replacement.
Speak directly with John Kraja, Qualifying Contractor (CGC1517295 & CCC1329271). No salesmen, no middleman brokers. We respond within 15 minutes during business hours.
(754) 301-6747
