Epoxy floors handle traffic, chemicals, and moisture better than almost anything else. We prep, install, and seal coatings that last in garages, warehouses, and commercial spaces.
Epoxy floor coating in Fort Lauderdale delivers one of the best value-to-impact ratios of any concrete improvement you can make — transforming dull, porous, stain-prone concrete floors into attractive, seamless, chemical-resistant surfaces that outperform bare concrete in every practical measure. From residential garage floors that finally look as good as the cars parked in them, to commercial kitchens, warehouses, and retail showrooms that need a floor that works as hard as the business does, Planet Construction FL installs epoxy floor systems matched to each application's specific performance demands.
Full 360° rebar undercut, mechanical rust descaling to bare metal, and cathodic zinc primer application.
Engineered multi-tier shoring towers safely support live and dead superstructure loads prior to chipping.
Turnkey threshold special inspections, concrete cylinder break tests, and final municipal certificate of completion.
Bare concrete floors stain easily, dust constantly, crack under heavy use, and look worse every year. In garages, warehouses, and commercial spaces, that means lower property value, harder cleanup, and ongoing maintenance costs. Cheap epoxy kits and DIY coatings peel within months, leaving the same problem plus a new one.
We diamond-grind the slab to open the surface, repair cracks and divots, and apply high-build epoxy systems engineered for the use case — automotive, industrial, retail, or residential. Topcoats add UV stability, slip resistance, and chemical resistance where needed. The result is a floor that bonds tight, cures hard, and outlasts cheap coatings by years.
Epoxy floor coatings deliver a combination of durability, appearance, and functionality that bare concrete simply cannot provide. The seamless, impermeable surface of a properly installed epoxy floor resists oil, chemical, and water penetration — protecting the concrete beneath from staining and the chloride infiltration that initiates rebar corrosion. Epoxy's surface hardness dramatically improves resistance to abrasion and impact compared to uncoated concrete. Aesthetically, epoxy transforms a gray, utilitarian slab into a clean, reflective, finished surface that elevates the appearance of any space it occupies. Maintenance is straightforward — the seamless surface has no grout joints or porous areas where bacteria and contamination can accumulate, making epoxy floors the preferred choice in food service, healthcare, and clean manufacturing environments throughout Fort Lauderdale.
SPECIALIZED DIVISION
Comprehensive repair protocols meeting Florida Building Code and structural engineering specifications.
Request Detailed Quote →
SURFACE PROTECTION
Seamless elastomeric barriers protecting underlying assemblies from South Florida salt-air and rain penetration.
View Waterproofing Options →
STRUCTURAL FRAMES
Engineered hydraulic load transfer towers, steel splice welds, and polymer micro-concrete jacketing.
Inquire About Shoring →
QUALITY CONTROL
On-site special inspector reviews, cylinder breaks, pull-off adhesion testing, and certificate of completion.
Request Engineering Audit →
EXTERIOR ENVELOPE
Stucco crack isolation, urethane expansion joint renewal, and coastal salt corrosion shielding systems.
Explore Facade Services →
SUBTERRANEAN DEFENSE
Hydrophobic polyurethane and epoxy injection stopping subterranean water intrusion in elevator pits and foundations.
Request Leak Diagnostic →Residential garage floor epoxy is one of Planet Construction FL's most popular services — and one that delivers an immediate, visible transformation for homeowners throughout Fort Lauderdale and Broward County. South Florida's garage floors are subject to vehicle tire pressure, oil drips, chemical exposure from lawn equipment, and the humidity that makes plain concrete surfaces damp and slippery. A decorative broadcast flake epoxy system — the most popular residential application — provides a chip-patterned surface that hides minor imperfections, provides excellent traction, and is available in dozens of color combinations to complement the home's interior. Clear topcoat sealing the flake layer provides UV stability and a glossy, easy-clean finish. The transformation from gray concrete to a polished, custom-color garage floor takes just 2 days and lasts 5–10 years with normal residential use.
Concrete structural restorations intersect with waterproofing membranes, expansion joints, and municipal milestone permits. Dividing trades creates delays, finger-pointing, and voided warranties.
Separate concrete patchers, painters, and coating contractors frequently void each other's warranties. If water intrusion recurs, the waterproofer blames the concrete mortar while the mason blames the sealant.
John Kraja directly manages the entire structural restoration under dual state licenses (CGC1517295 & CCC1329271). In-house crews chip spalls, treat rebar, cast structural mortars, and apply warranted traffic coatings under single-source accountability.
We pull permits directly across Fort Lauderdale, Pompano Beach, Hollywood, Boca Raton, and Weston building departments. We coordinate engineering special inspections daily to prevent costly stop-work delays.
Commercial and industrial epoxy flooring demands more from the coating system than residential applications. Restaurant kitchens require FDA-compliant, antimicrobial epoxy systems with cove base details that create a seamless, sanitary floor-to-wall transition. Warehouses and manufacturing facilities need high-build epoxy or urethane mortar systems that resist forklift traffic, point loads, and heavy impact. Retail showrooms benefit from self-leveling epoxy systems in solid colors or decorative metallic finishes that create a distinctive, high-end aesthetic. Healthcare facilities require seamless, easily disinfected surfaces that meet infection control standards. Planet Construction FL specifies the epoxy system appropriate to each commercial environment — not a residential system applied in a commercial context, which is a common failure mode in the market.
Technicians review engineer reports and conduct acoustical hammer sounding surveys to map hidden subsurface delaminations.
Erecting calibrated multi-tier hydraulic shoring towers and pulling municipal building department permits across South Florida.
Chipping concrete to 3/4-inch clearance around oxidized steel, sandblasting to bare metal (SSPC-SP 10), and applying cathodic zinc primer.
Scrubbing cementitious bonding slurry into SSD substrate, casting high-strength micro-concrete (>6,500 PSI), and controlling wet curing.
Applying elastomeric waterproofing barrier coats, performing flood testing, and securing final municipal building department permit sign-off.
Epoxy floor coating failure almost always traces back to inadequate surface preparation. A properly installed epoxy floor bonds chemically and mechanically to the concrete substrate — and that bond requires a properly prepared surface. Planet Construction FL performs shot blasting or diamond grinding on every epoxy floor project to achieve the concrete surface profile (CSP) required by the epoxy system manufacturer. Oil contamination is treated with degreaser and verified removed before coating begins. Cracks and spalled areas are repaired with epoxy filler before the coating system is applied. Moisture vapor emissions — a particularly significant issue in South Florida's humid climate and shallow water table conditions — are assessed and addressed with moisture-tolerant primer systems or moisture mitigation coatings where vapor emissions exceed the topcoat product's tolerance. Skipping any of these steps produces a floor coating that peels within months.
Phased construction logistics, resident notices, reserve study alignment, and direct engineer of record milestone recertification sign-offs.
Documented case studies showcasing engineered structural repairs across Broward and Palm Beach County properties.
Full-depth cantilevered balcony spall excavations, railing pocket re-anchoring, and multi-layer pedestrian traffic coatings for 48 units.
Extensive rebar replacement, micro-concrete form-and-pour jackets, and salt corrosion shielding for coastal high-rise assemblies.
Hydro-demolition of 6,500 sq ft delaminated deck concrete, heavy vehicular expansion joints, and polyurethane traffic membranes.
Clear answers regarding engineering specifications, municipal code compliance, and structural concrete restoration standards.
A properly prepared and installed epoxy floor in a residential garage lasts 5–10 years before recoating is needed. Commercial and industrial epoxy systems are designed for longer service lives — heavy-duty urethane mortar systems in warehouse applications can last 10–20 years. In South Florida's climate, UV exposure through garage doors and skylights can yellow or chalk standard epoxy topcoats — UV-stable polyurethane or polyaspartic topcoats are specified for applications with direct sun exposure.
In most cases, yes — if the existing epoxy is well-bonded, not delaminating, and compatible with the new system. We test adhesion and compatibility before proposing application over existing coatings. Where existing epoxy is peeling, flaking, or incompatible with the new system, it must be ground off before the new system is applied. Applying new epoxy over failing old epoxy just transfers the failure mode to the new surface.
A standard residential two-car garage floor (400–500 sq ft) takes 2 days — preparation and base coat on day 1, topcoat and cure on day 2. The floor is ready for light foot traffic in 24 hours and vehicle traffic in 48–72 hours depending on the system and temperature. Larger commercial floors are completed in phases to allow portions to return to service while other sections cure.
Standard gloss epoxy can be slippery when wet — similar to any smooth, impermeable surface. Planet Construction FL adds anti-slip aggregate to all epoxy topcoats in garage and commercial applications where wet conditions are expected. The broadcast flake systems popular in residential garages also provide inherent texture that improves traction compared to smooth epoxy. We specify the appropriate slip resistance level for each application during the design consultation.
Free epoxy quote with system recommendations. We'll match the right coating to your space and use case — no upselling.
Speak directly with John Kraja, Qualifying Contractor (CGC1517295 & CCC1329271). No salesmen, no middleman brokers. We respond within 15 minutes during business hours.
(754) 301-6747
