Substrate Engineering Survey
Laser scanning and mechanical sounding survey mapping existing surface integrity and design tolerances.
Tile & Metal Roofing Specialists • CCC1329271
Tile & Metal Roof Replacement in Fort Lauderdale, FL
High-wind concrete barrel tile, Spanish clay S-tile, and concealed-fastener 0.040" standing seam aluminum roofing engineered to withstand 175+ MPH hurricane wind speeds across Broward and Palm Beach counties.
Florida CCC License
CCC1329271 Certified
HVHZ Approved
Miami-Dade NOA Systems
100% In-House Crews
Direct Supervision
FL STATE LICENSED
CGC1517295 • CCC1329271
100%
In-House Crews • Zero Brokers
FLORIDA HIGH-VELOCITY HURRICANE ZONE ROOFING
Engineered Roofing Systems for South Florida Tropical Weather
South Florida roofs endure relentless environmental stressors: extreme ultraviolet radiation, torrential tropical downpours, ponding water, and catastrophic hurricane-force wind uplift.
As a Florida Certified Roofing Contractor (CCC1329271) and Certified General Contractor (CGC1517295), Planet Construction installs commercial TPO, modified bitumen, standing seam metal, and high-profile concrete tile roofing systems engineered to exceed High-Velocity Hurricane Zone (HVHZ) requirements.
Under the direct qualifying supervision of John Kraja, our dedicated crews perform structural deck repairs, tapered insulation layout, self-adhering secondary underlayments, and factory-certified membrane heat-welding with zero subcontractor brokers.
Miami-Dade NOA & HVHZ Rated
Every roofing system carries certified Florida Product Approval or Miami-Dade Notice of Acceptance engineered for 175+ MPH wind zones.
Continuous Molecular Welds
Robotic hot-air heat-welded TPO seams form continuous monolithic waterproof barriers that eliminate seam failure risks.
Turnkey Structural Deck Tie-In
Dual CGC/CCC licensing allows our in-house masons and roofers to repair structural concrete and timber decks under one permit.
ENGINEERED PROTOCOL • TECHNICAL SPECIFICATIONS
Engineered Execution & Technical Specifications
Every project follows a calibrated technical sequence engineered to withstand South Florida coastal conditions.
Preparation & Mechanical Anchor
Mechanical abrasion, rust descaling, and substrate conditioning ensuring high-tensile bonding adhesion.
Precision Application
Installation of certified materials by dedicated in-house craftsmen according to Florida Building Code.
Quality Control Sign-Off
Multi-point inspection, municipal permit sign-off, and issuance of comprehensive contractor warranties.
ROOFING DISCIPLINES • DIVISION SCOPES
Comprehensive Commercial & Residential Roofing Services
From flat commercial TPO assemblies to hurricane-grade tile and metal replacements, built to withstand Florida storms.
SPECIALIZED DIVISION
ENGINEERED RESTORATION
tile metal roof replacement Core Remediation
Comprehensive repair protocols meeting Florida Building Code and structural engineering specifications.
Request Detailed Quote →
SURFACE PROTECTION
MOISTURE & TRAFFIC COATINGS
Waterproof Membrane Integration
Seamless elastomeric barriers protecting underlying assemblies from South Florida salt-air and rain penetration.
View Waterproofing Options →
STRUCTURAL FRAMES
LOAD-BEARING ELEMENTS
Structural Reinforcement & Shoring
Engineered hydraulic load transfer towers, steel splice welds, and polymer micro-concrete jacketing.
Inquire About Shoring →
QUALITY CONTROL
MUNICIPAL COMPLIANCE
Threshold Inspections & Testing
On-site special inspector reviews, cylinder breaks, pull-off adhesion testing, and certificate of completion.
Request Engineering Audit →
EXTERIOR ENVELOPE
EXTERIOR RESTORATION
Facade & Perimeter Protection
Stucco crack isolation, urethane expansion joint renewal, and coastal salt corrosion shielding systems.
Explore Facade Services →
SUBTERRANEAN DEFENSE
ACTIVE LEAK DEFENSE
Pressure Chemical Grout Injection
Hydrophobic polyurethane and epoxy injection stopping subterranean water intrusion in elevator pits and foundations.
Request Leak Diagnostic →THE DUAL-LICENSE DIFFERENCE
Why Hiring a Single-Source General Contractor Saves Projects
Roofing failures frequently involve structural decking, parapet walls, stucco transitions, and drainage scuppers. Subcontracted roofers lack general contractor licensing to repair damaged substrates.
THE TRADITIONAL MODEL
Disjointed Subcontracting
Sales-broker roofing companies subcontract piece-rate crews who cover up rotten timber decking or spalled concrete rather than repairing it, leading to structural failures and voided manufacturer warranties.
Critical Risk: Multi-vendor disputes, finger-pointing over leaks or failures, and voided manufacturer warranties.
★ SINGLE-SOURCE GC CONTROL
THE PLANET CONSTRUCTION STANDARD
Unified General Contractor Control
Planet Construction qualifies every roof under CCC1329271 and CGC1517295. In-house crews inspect the deck, repair structural concrete, engineer positive drainage, and heat-weld warranted systems with single-source accountability.
Guaranteed Result: One binding contract, dedicated in-house crews, zero middleman markups, and total warranty accountability.
MUNICIPAL RAPIDITY
Accelerated Permit Milestones
We pull permits directly across Fort Lauderdale, Pompano Beach, Hollywood, Boca Raton, and Weston building departments. We coordinate engineering special inspections daily to prevent costly stop-work delays.
Turnkey Efficiency: Faster city sign-offs, reduced disruption, and full Florida Building Code certification.
RIGOROUS 5-PHASE PROTOCOL
Our Proven Engineered Roofing Installation Process
Our roofing installation follows an uncompromising quality sequence from engineering wind-uplift calculations to final municipal building official sign-off.
01
Calculating perimeter and corner zone fastener densities per ASCE 7-22 wind-load standards and municipal building codes.
02
Submitting municipal permit packages with verified Florida Product Approvals, manufacturer specifications, and secondary water barrier details.
03
Stripping existing roofs down to bare substrate, inspecting concrete or timber decking, and executing required structural repairs.
04
Installing tapered polyiso insulation to eliminate standing water, followed by ASTM D1970 self-adhering secondary water barriers.
05
Installing commercial TPO, tile, or metal systems, probe-testing all seams, passing city inspections, and issuing manufacturer warranties.
FIELD CRAFT • REAL SOUTH FLORIDA SITES
Featured Roofing Systems Division Projects
Every photo shows real Planet Construction crews on active South Florida job sites. We welcome building owners, property managers, and board members to inspect our completed work.
FORT LAUDERDALE • COMMERCIAL FLAT ROOF
Commercial 60-Mil TPO Roof Replacement
Installed 14,000 sq ft heat-welded TPO cool roof system with 2.5-inch tapered polyiso insulation to eliminate ponding water.
BOCA RATON • LUXURY RESIDENTIAL
Concrete Barrel Tile Hurricane Roof
Complete roof replacement featuring foam-adhesive adhered concrete tiles, copper valley flashings, and self-adhered underlayment.
HOLLYWOOD • COMMERCIAL LEAK REPAIR
Emergency Flat Roof Restoration & Coating
Repaired failing parapet flashing transitions, restored deteriorated seams, and applied high-solids silicone roof coating system.
COMMON QUESTIONS • STRAIGHT ANSWERS
tile metal roof replacement FAQs
Transparent answers on engineering protocols, material specifications, project timelines, and Florida Building Code compliance.
How long does a typical tile metal roof replacement project take in South Florida?
Project duration depends on square footage and municipal permitting requirements. Typical installations range from several days to a few weeks, sequenced to minimize resident or commercial tenant disruption.
Does Planet Construction pull municipal permits for tile metal roof replacement?
Yes. As a Florida Certified General Contractor (CGC1517295) and Roofing Contractor (CCC1329271), we pull permits directly from municipal building departments across Broward, Palm Beach, and Miami-Dade counties.
What warranties are provided on tile metal roof replacement?
We provide comprehensive single-source warranties covering both contractor workmanship and manufacturer material performance, backed by our dual state licensure and $2M liability insurance.
FAST WRITTEN ESTIMATES • DIRECT ACCOUNTABILITY
Request a Consultation for tile metal roof replacement
Submit your project scope, building dimensions, or engineering report for an itemized, engineer-reviewed written proposal.
Need immediate contractor answers?
Speak directly with John Kraja, Qualifying Contractor (CGC1517295 & CCC1329271). No salesmen, no middleman brokers. We respond within 15 minutes during business hours.
(754) 301-6747- Florida Certified General Contractor • Lic #CGC1517295
- Florida Certified Roofing Contractor • Lic #CCC1329271
- $2,000,000 General Liability + Complete Workers' Comp