MULTI-SLIDE DOORS
Impact Sliding Glass Doors
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →Accordion hurricane shutters are the convenient, always-ready storm protection — no panels to find, no installation each storm. We install accordion systems that operate smoothly for years.
Accordion hurricane shutters in Fort Lauderdale are the most popular hurricane protection solution for the reason that matters most when a storm is approaching — they deploy in seconds. No storage, no hauling panels, no tools, no lifting. Accordion shutters fold open flat against the wall beside each window and door when not in use, and when a storm approaches, they push across the opening in one smooth motion and lock in place. For Fort Lauderdale homeowners who want permanent, always-ready hurricane protection without the operational complexity of storm panels or the expense of full impact window replacement, accordion shutters are the go-to solution.
Engineered sub-buck installation with 5/16" stainless Tapcon masonry anchors meeting high-pressure wind envelopes.
Multi-layer impact glass resistant to 9-lb 2x4 projectile strikes at 50 feet per second (Large Missile D).
General Contractor (CGC1517295) and Roofing Contractor (CCC1329271) single-source warranty accountability.
Removable storm panels are cheap, but they're a chore — finding them, hauling them out, climbing ladders, and installing them as the storm approaches. Most homeowners delay or skip it, leaving their home unprotected when it matters most. The savings of panels disappear the first time you need them in a hurry.
We install accordion shutters with corrosion-resistant tracks, smooth-operating slats, and secure locking — all designed for Florida coastal conditions. Each install is permitted, anchored, and tested for smooth deployment. The result is hurricane protection ready in minutes, not hours, every time.
Accordion shutters are installed on a track system mounted permanently at the top and bottom of each window and door opening. The shutter panels — made from extruded aluminum blades assembled with stainless steel rivets — fold together accordion-style and park in a stack against the wall when open. When deployment is needed, the folded stack is simply pushed across the opening, the two meeting panels are locked together at the center, and a bottom bar is engaged in the floor track. The entire process for a standard window takes 10–15 seconds per opening, and a whole-home deployment — covering 10–15 openings — takes most homeowners under 10 minutes with no physical lifting required. Locking hardware on quality accordion shutters engages both the center meeting rails and the outer guide channels, providing the rigid, fully-supported closure that meets Florida Building Code impact requirements.
MULTI-SLIDE DOORS
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →
IMPACT WINDOWS
Energy-efficient Low-E insulated glass packages with argon fill, heavy sashes, and stainless multipoint hardware.
View Window Systems →
ARCHITECTURAL DOORS
Custom oversized impact entrance systems combining high security, three-point deadbolts, and designer finishes.
Inquire About Doors →
COMMERCIAL GLAZING
Thermally broken heavy-gauge commercial framing, panic hardware, and impact glass for retail and plazas.
Explore Commercial Glass →
STORM SHUTTERS
Extruded aluminum curved blades, keyed center locks, and Somfy motorized roll-down systems for wide lanais.
Inquire About Shutters →
GARAGE DOORS
Reinforced steel strut backings, heavy-duty commercial track assemblies, and insulated quiet openers.
Request Garage Bid →Accordion shutters have earned their position as Fort Lauderdale's most popular shutter type through several practical advantages. The instant deployment capability eliminates the race-against-the-storm-track timing problem that storm panels create — accordion shutters are ready in minutes at any hour, in any weather, without any advance preparation. The permanent installation means nothing needs to be retrieved from storage — no searching for where the panels were stored, no hoping the panels weren't damaged since last season. The folded panels when open are readily visible — they don't disappear like roll-down shutters in housing boxes — but most Fort Lauderdale homeowners accept this aesthetic tradeoff for the operational convenience. For vacation properties and seasonal rentals where the owner cannot always be present to manage pre-storm preparation, accordion shutters are frequently the most practical protection solution.
Accordion shutter installation at Planet Construction FL begins with an opening-by-opening assessment — measuring each window and door, confirming the wall construction and available anchoring, and identifying any architectural features that affect track mounting or panel clearance. Custom shutter panels are fabricated to the measured dimensions for each opening. The top track is anchored to the wall above each opening in structural masonry, concrete, or reinforced framing per the product NOA requirements. Bottom tracks are set at the floor level for doors and at the sill level for windows. Shutter panels are assembled in the track, tested for smooth operation, and adjusted for proper alignment and closure. Locking hardware is installed and tested. Permit inspection is scheduled and completed. We walk through proper operation and maintenance with the property owner before project closeout.
Precision laser opening measurements, wind pressure calculations, and city permit package submittal.
Sub-buck inspection, rot replacement with pressure-treated lumber, and liquid waterproof sill flashing.
Setting heavy-gauge aluminum frames plumb, leveling sills, and securing Tapcons into concrete block.
Tooling continuous polyurethane perimeter expansion joints and passing final municipal building inspection.
Accordion shutters represent the middle tier of hurricane shutter investment — more expensive than storm panels, less expensive than motorized roll-down systems. A typical Fort Lauderdale home with 12–15 openings can expect accordion shutter installation costs from $10,000 to $18,000 depending on the opening sizes, wall construction complexity, and the specific product line specified. Properly installed accordion shutters that meet Florida Building Code requirements qualify for wind mitigation insurance premium discounts — typically 15–30% on the windstorm premium component. For a Fort Lauderdale home paying $4,000–$8,000 annually in windstorm insurance, these savings can represent $600–$2,400 per year — a meaningful contribution toward the installation cost payback.
Phased window installation schedules, resident notifications, HOA board architectural review submittals, and clean master permitting.
Engineering-compliant impact windows, sliding glass door retrofits, and commercial storefront assemblies across Broward and Palm Beach counties.
Custom bronze anodized French patio impact doors with multi-point locking and laminated Low-E energy glass.
Turnkey replacement of 120 sliding glass balcony doors and casement windows engineered for high-altitude wind loads.
Commercial storefront aluminum framing with impact-rated laminate safety glass and commercial ADA entry doors.
Direct answers on NOA ratings, insurance premium reductions, installation lead times, and financing options in South Florida.
Accordion shutters provide privacy when closed — solid aluminum panels block both the view and the light. Some homeowners use them routinely for ground-floor privacy, particularly at night. However, accordion shutters are not designed for frequent daily operation the way window treatments are — they are engineered for storm deployment and occasional use, not the hundreds of open-close cycles per year that daily operation would involve. For daily privacy, interior window treatments are the appropriate solution alongside accordion shutters for storm protection.
Yes — accordion shutters for sliding glass door openings are among the most common applications we install. Large sliding glass door openings require accordion shutter panels sized for the full door width, and the bottom track is mounted flush with the floor at the door threshold. The shutter closes across the full door opening, providing complete protection for what is often the largest glazed opening in a Fort Lauderdale home.
A whole-home accordion shutter installation on a typical Fort Lauderdale residence with 10–15 openings takes 2–3 days for installation. Custom panel fabrication typically takes 3–6 weeks after permit approval and order placement. The full timeline from contract to installation completion — including permit approval and fabrication — is typically 6–10 weeks.
Yes — annual maintenance is important for long shutter service life in Fort Lauderdale's salt air environment. The blade hinges and track channels should be cleaned of salt and debris buildup and lubricated with silicone spray or light machine oil annually. The locking hardware should be tested for proper engagement and adjusted or replaced if sluggish. Shutter surfaces should be rinsed periodically to remove salt accumulation. We provide a maintenance checklist at project completion and offer annual maintenance service for clients who prefer professional servicing.
Request on-site laser measurements, product sample demonstrations, or line-item quotes for your building. Fully permitted under CGC1517295.