MULTI-SLIDE DOORS
Impact Sliding Glass Doors
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →Single hung impact windows are the workhorse of Florida homes — affordable, code-compliant, and built to handle hurricane winds. We install systems engineered for the conditions.
Single hung window installation in Fort Lauderdale is one of the most common window replacement projects we handle — and for good reason. Single hung windows offer the classic vertical sash look that complements Fort Lauderdale's residential architecture, combined with the simple, durable mechanics that make them a reliable long-term performer in South Florida's demanding climate. Available in impact-rated configurations that meet Florida's HVHZ requirements, single hung windows are a cost-effective choice for full-home replacement projects throughout Broward County.
Engineered sub-buck installation with 5/16" stainless Tapcon masonry anchors meeting high-pressure wind envelopes.
Multi-layer impact glass resistant to 9-lb 2x4 projectile strikes at 50 feet per second (Large Missile D).
General Contractor (CGC1517295) and Roofing Contractor (CCC1329271) single-source warranty accountability.
Pre-impact single hung windows weren't built for hurricane winds, modern energy codes, or the salt-air corrosion that destroys cheap hardware in a few years. They leak air, leak water, and offer almost no protection during a storm — which is why insurance companies penalize properties that still have them.
We install impact-rated single hung windows from trusted manufacturers, with proper bucking, anchoring, flashing tape, and sealing. Every install is permitted, inspected, and documented for your insurance discount. The result is windows that handle hurricane winds, lower your energy bills, and increase your property value.
A single hung window has two sashes — an upper fixed sash and a lower operable sash that slides vertically to open. The upper sash does not move, which keeps the window's hardware simple and reduces the number of mechanical components that can wear or fail over time. The lower sash tilts inward on most modern single hung designs for easy cleaning from inside the home — a practical feature for Fort Lauderdale's multi-story residential buildings where exterior window cleaning is difficult or expensive. Single hung windows are available in a wide range of frame materials, sizes, and grid configurations that complement both traditional and contemporary Fort Lauderdale architecture.
MULTI-SLIDE DOORS
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →
IMPACT WINDOWS
Energy-efficient Low-E insulated glass packages with argon fill, heavy sashes, and stainless multipoint hardware.
View Window Systems →
ARCHITECTURAL DOORS
Custom oversized impact entrance systems combining high security, three-point deadbolts, and designer finishes.
Inquire About Doors →
COMMERCIAL GLAZING
Thermally broken heavy-gauge commercial framing, panic hardware, and impact glass for retail and plazas.
Explore Commercial Glass →
STORM SHUTTERS
Extruded aluminum curved blades, keyed center locks, and Somfy motorized roll-down systems for wide lanais.
Inquire About Shutters →
GARAGE DOORS
Reinforced steel strut backings, heavy-duty commercial track assemblies, and insulated quiet openers.
Request Garage Bid →Single hung windows are particularly well-suited to Fort Lauderdale's residential market for several practical reasons. Their simpler sash mechanism — one operable sash versus two in a double hung — means fewer parts to maintain and a more cost-effective price point per window. The fixed upper sash creates a more airtight perimeter seal than a double hung with two operable sashes, which is a meaningful advantage in Fort Lauderdale's air-conditioned environment where preventing conditioned air loss is a priority. For replacement projects in older Fort Lauderdale homes with existing single hung openings, replacing like-for-like with new impact-rated single hung windows avoids the structural modifications that changing to a different window type might require.
All single hung windows we install in Fort Lauderdale are impact-rated — featuring laminated glass with an interlayer that holds the glass intact even if the pane is shattered by hurricane-force debris. The window frame and sash are reinforced to resist the design pressure loads specified for Broward County's HVHZ designation. Each product we install carries a valid Florida Product Approval Notice of Acceptance (NOA) confirming compliance with Florida Building Code impact and design pressure requirements. Installation per the NOA — proper fastener type, spacing, and embedment depth in the structural rough opening — is what the building department verifies at final inspection, and what actually provides the code-compliant hurricane protection the product is rated for.
Precision laser opening measurements, wind pressure calculations, and city permit package submittal.
Sub-buck inspection, rot replacement with pressure-treated lumber, and liquid waterproof sill flashing.
Setting heavy-gauge aluminum frames plumb, leveling sills, and securing Tapcons into concrete block.
Tooling continuous polyurethane perimeter expansion joints and passing final municipal building inspection.
The primary practical difference between single hung and double hung windows is that double hung windows have two operable sashes — both the upper and lower can be opened and tilted in for cleaning. Double hung windows provide more ventilation flexibility and easier exterior cleaning, but cost more and have more mechanical components. For Fort Lauderdale homeowners, the ventilation advantage of double hung is often less important than it would be in a cooler climate — most South Florida homes rely on air conditioning rather than natural ventilation for most of the year. Single hung is typically the right choice for budget-conscious full-home replacement projects; double hung is worth considering where easy cleaning or flexible ventilation is a specific priority.
Phased window installation schedules, resident notifications, HOA board architectural review submittals, and clean master permitting.
Engineering-compliant impact windows, sliding glass door retrofits, and commercial storefront assemblies across Broward and Palm Beach counties.
Custom bronze anodized French patio impact doors with multi-point locking and laminated Low-E energy glass.
Turnkey replacement of 120 sliding glass balcony doors and casement windows engineered for high-altitude wind loads.
Commercial storefront aluminum framing with impact-rated laminate safety glass and commercial ADA entry doors.
Direct answers on NOA ratings, insurance premium reductions, installation lead times, and financing options in South Florida.
Vinyl (PVC) frames are the most popular choice for Fort Lauderdale residential window replacement — they are non-corrosive in South Florida's salt air, require no painting, and provide excellent thermal performance. Aluminum frames are a traditional South Florida choice with high strength-to-weight ratio and slim sightlines, though they conduct heat more readily than vinyl. Fiberglass frames offer the best thermal performance and dimensional stability but come at a higher price point. We discuss frame material options for each project based on the home's architecture, budget, and performance priorities.
Yes — most modern single hung windows have a tilt-in lower sash that allows the exterior glass surface to be cleaned from inside the home. The lower sash tilts inward on two pivot points at the sill, rotating approximately 90 degrees for easy access. This feature is standard on most quality single hung impact window products we install and eliminates the need to clean exterior surfaces from a ladder on Fort Lauderdale's multi-story homes.
Quality impact single hung windows with vinyl or aluminum frames typically last 25–40 years in Fort Lauderdale's climate before replacement is warranted. The laminated impact glass itself does not degrade in normal conditions. The primary wear items are the sash weatherstripping, balance system, and tilt-in hardware — all of which are replaceable components that can extend the window's service life well beyond the initial installation.
Yes — all major impact window manufacturers offer custom-sized single hung windows for replacement applications where the existing rough opening dimensions don't match standard product sizes. Custom sizing is standard for replacement projects in older Fort Lauderdale homes where non-standard opening dimensions are common. We measure every opening precisely before ordering to ensure the specified products fit the existing openings without structural modification.
Request on-site laser measurements, product sample demonstrations, or line-item quotes for your building. Fully permitted under CGC1517295.