IMPACT GLAZING • DIV 08 FL CGC1517295 • CCC1329271

Sliding Glass Door Installation in Fort Lauderdale

Sliding glass doors are the most-used opening in many Florida homes — and one of the most vulnerable in a storm. We install impact sliders that perform every day and protect when it counts.

Miami-Dade NOA Large Missile Impact
HVHZ Certified +/- 100 PSF Design Pressure
100% In-House Crews Dual-Licensed Quality
Sliding Glass Door Installation in Fort Lauderdale
FL STATE LICENSED
CGC1517295 • CCC1329271
175+ MPH
Wind Rating
Low-E
Solar Insulated
100%
NOA Approved
Sliding Glass Doors Built for Florida Living
100% In-House Crews • Zero Brokers
Planet Construction Florida glazing installers
HURRICANE IMPACT GLAZING • FIELD EXPERTISE

Sliding Glass Doors Built for Florida Living

Sliding glass door installation in Fort Lauderdale is one of the most common and impactful upgrades we install — replacing heavy, outdated aluminum sliders that rattle in the wind and barely lock with smooth-gliding, impact-rated systems that provide genuine hurricane protection, energy performance, and the clean aesthetic that modern Fort Lauderdale homes demand. Sliding glass doors are the primary indoor-outdoor connection in most South Florida homes, and the quality of that connection — how the door operates, how it seals, how it looks — matters every single day. At Planet Construction FL, we install sliding glass doors that you'll appreciate opening every morning.

Structural Masonry Anchoring

Engineered sub-buck installation with 5/16" stainless Tapcon masonry anchors meeting high-pressure wind envelopes.

Laminated PVB & SentryGlas

Multi-layer impact glass resistant to 9-lb 2x4 projectile strikes at 50 feet per second (Large Missile D).

Dual-Licensed Permitting & Execution

General Contractor (CGC1517295) and Roofing Contractor (CCC1329271) single-source warranty accountability.

Storm Hazard Reality • Envelope Breaches

Old Sliding Doors Are Insurance Liabilities

Pre-impact sliding glass doors are one of the largest unprotected openings in many Florida homes — and during a hurricane, they're often the first thing to fail. Beyond storm risk, old sliders leak air and water, run rough on worn tracks, and cost insurance discounts that newer impact systems unlock.

Mandatory Building Department Benchmark • FBC Standards
Engineered Protocol • Quality Assurance

Impact Sliding Doors With Smooth Daily Operation

We install impact-rated sliding glass doors with reinforced frames, multi-point locks, and corrosion-resistant tracks and hardware. Installation includes proper structural prep, anchoring, sealing, and full permits. The result is sliding doors that operate smoothly every day and protect your home in the worst weather.

Fully permitted with signed & sealed engineering calculations
COMMERCIAL • MULTI-FAMILY • RESIDENTIAL

Sliding Glass Door Options in Fort Lauderdale

The sliding glass door market in Fort Lauderdale offers a range of configurations and performance levels that vary significantly in quality and price. Standard two-panel sliding doors — one fixed panel and one sliding panel — are available in widths from 5 feet to 10 feet in standard sizes, with larger custom configurations available. Three-panel systems — two sliding panels flanking a fixed center — create wider openings from 9 feet to 16 feet. Pocket-style sliding doors, where the sliding panel slides into a wall pocket rather than past a fixed panel, are available for installation where the stacked panel position is an aesthetic concern. Multi-panel stacking systems approach bifold door performance in opening width while maintaining a simpler track and roller mechanism. We discuss the right configuration for each opening during our initial site visit.

Hurricane Impact Sliding Glass Doors MULTI-SLIDE DOORS
BALCONY & PATIO SLIDERS

Impact Sliding Glass Doors

Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.

Request Detailed Quote →
Architectural Casement & Single-Hung Windows IMPACT WINDOWS
SINGLE-HUNG & CASEMENT

Hurricane Impact Windows

Energy-efficient Low-E insulated glass packages with argon fill, heavy sashes, and stainless multipoint hardware.

View Window Systems →
Luxury French & Pivot Entry Doors ARCHITECTURAL DOORS
FRENCH & PIVOT DOORS

Luxury Impact Entry Systems

Custom oversized impact entrance systems combining high security, three-point deadbolts, and designer finishes.

Inquire About Doors →
Commercial Storefront & Curtain Wall Systems COMMERCIAL GLAZING
COMMERCIAL STOREFRONT

Commercial Storefront & Glass

Thermally broken heavy-gauge commercial framing, panic hardware, and impact glass for retail and plazas.

Explore Commercial Glass →
Accordion & Roll-Down Hurricane Shutters STORM SHUTTERS
EXTERIOR PROTECTION

Accordion & Motorized Shutters

Extruded aluminum curved blades, keyed center locks, and Somfy motorized roll-down systems for wide lanais.

Inquire About Shutters →
Wind-Rated Impact Garage Doors GARAGE DOORS
WIND-CODE ENFORCED

Hurricane Impact Garage Doors

Reinforced steel strut backings, heavy-duty commercial track assemblies, and insulated quiet openers.

Request Garage Bid →
Regulatory Code Standards • FBC & Miami-Dade NOA

Impact-Rated Sliding Doors for Hurricane Protection

Every sliding glass door we install in Fort Lauderdale is impact-rated — meeting Florida Building Code requirements for Broward County's HVHZ designation. Impact sliding doors use laminated glass panels that, like impact windows, remain in the frame even when shattered by hurricane debris. The sliding door frame is anchored to the structural rough opening per the product NOA, and the interlock between the sliding and fixed panels is engineered to maintain the required design pressure resistance in both positive and negative pressure conditions. Many older Fort Lauderdale homes still have non-impact sliding doors that rely on X-brace shutters or panels for storm protection — replacing these with impact-rated doors eliminates the shutter deployment requirement and provides continuous protection year-round.

Licensed CGC1517295 • CCC1329271 Execution
Full Permit Coordination & Building Inspection Sign-Offs
Glazing Verification Criteria
DESIGN PRESSURE SPECIFICATION
Up to +/- 100 PSF Wind Load
Calibrated structural calculations for exposure category and building height.
IMPACT CERTIFICATION
ASTM E1886 & E1996 Large Missile
Passes repeated missile strike and 9,000 cyclical positive/negative wind cycles.
ENERGY & THERMAL PERFORMANCE
Energy Star & Low-E Coating
Substantial solar heat gain reduction and significant annual FPL power savings.
Request Glazing Calculation Review →
FIELD APPLICATION SPECIFICATIONS

Energy Efficiency of Modern Sliding Doors

Modern impact sliding glass doors dramatically outperform the older aluminum sliding doors common in Fort Lauderdale's housing stock in energy performance. Low-E coating on the laminated glass reflects infrared solar radiation — reducing the solar heat gain through a south or west-facing sliding door by 50–70% compared to uncoated glass. Thermally broken frame systems interrupt the heat conduction path through the aluminum frame, reducing the heat transfer that makes frames hot to the touch on sunny days and contributes to the cooling load in adjacent rooms. The improved weatherstripping in modern sliding door systems also reduces air infiltration compared to older products whose seals have degraded. The combined energy performance improvement can reduce cooling costs in rooms with large sliding glass door areas noticeably in Fort Lauderdale's year-round air conditioning climate.

01
Phase 01 • Engineering & Sizing

Engineering & Permitting

Precision laser opening measurements, wind pressure calculations, and city permit package submittal.

02
Phase 02 • Opening Preparation

Buck Prep & Flashing

Sub-buck inspection, rot replacement with pressure-treated lumber, and liquid waterproof sill flashing.

03
Phase 03 • Precision Setting

Structural Anchoring

Setting heavy-gauge aluminum frames plumb, leveling sills, and securing Tapcons into concrete block.

04
Phase 04 • Seal & Certification

Polyurethane Seal & Inspect

Tooling continuous polyurethane perimeter expansion joints and passing final municipal building inspection.

2-Panel vs. 3-Panel Sliding Doors
Field Verified • Active Florida Site
Florida Building Envelope • HVHZ Glazing Compliance
Direct Engineer-of-Record Coordination • Licensed CGC1517295 Execution
Asset Managers • HOA Boards

2-Panel vs. 3-Panel Sliding Doors

The choice between two-panel and three-panel sliding door configurations in Fort Lauderdale comes down primarily to the desired opening width and the stacked panel situation. A two-panel door uses half the total door width as the opening — a 6-foot door provides a 3-foot clear passage. A three-panel door with two sliding panels provides a larger opening — a 9-foot three-panel door provides 6 feet of clear passage when both panels are open. For rooms where passage width and outdoor connection are priorities, the three-panel provides meaningfully better access. For spaces where the stacked panel position is a concern — stacking past a corner or into a limited wall space — the two-panel's simpler stacking is preferable. We evaluate each opening's requirements and recommend the right configuration during the estimate visit.

Multi-Unit Program Support

Phased window installation schedules, resident notifications, HOA board architectural review submittals, and clean master permitting.

HOA Architectural Board Presentations & Color Match Submittals
100% Financing & PACE Capital Programs for Qualified Properties
Request Program Proposal Direct Qualifier CGC1517295 • No Obligation Glazing Review
RECENT REGIONAL PERFORMANCE • VERIFIED SITES

Documented Impact Glazing Projects • South Florida Portfolio

Engineering-compliant impact windows, sliding glass door retrofits, and commercial storefront assemblies across Broward and Palm Beach counties.

Weston Luxury Estate Impact Glazing
DIV 08 • GLAZING Weston, FL
WESTON • LUXURY RESIDENTIAL

Weston Luxury French Door Retrofit

Custom bronze anodized French patio impact doors with multi-point locking and laminated Low-E energy glass.

Miami-Dade NOA • Broward County Approved
Fort Lauderdale Condo Tower Window Replacement
DIV 08 • HIGH-RISE Fort Lauderdale, FL
FORT LAUDERDALE BEACH • CONDOMINIUM

Oceanfront High-Rise Impact Glazing

Turnkey replacement of 120 sliding glass balcony doors and casement windows engineered for high-altitude wind loads.

+/- 100 PSF Wind Rating • City of Fort Lauderdale
Pompano Beach Commercial Storefront Glazing
DIV 08 • COMMERCIAL Pompano Beach, FL
POMPANO BEACH • COMMERCIAL PLAZA

Retail Storefront Impact Curtain Wall

Commercial storefront aluminum framing with impact-rated laminate safety glass and commercial ADA entry doors.

HVHZ Certified • Broward County Jurisdiction
RAPID REGIONAL RESPONSE • TRI-COUNTY SERVICE

Need an Urgent Impact Window Measurement or Replacement Quote?

Speak directly with our field engineering team for laser-accurate measurements, engineering wind calcs, and competitive quotes.

FIELD EXPERTISE • CLARITY FOR OWNERS & BOARDS

Frequently Asked Questions • Impact Windows & Doors

Direct answers on NOA ratings, insurance premium reductions, installation lead times, and financing options in South Florida.

How long do sliding glass door rollers last?

Quality sliding door roller systems in impact-rated products last 15–25 years with normal use and maintenance. Salt air and debris accumulation in the track are the primary aging factors. Annual cleaning of the bottom track — removing dirt, debris, and corrosion products — and silicone lubrication of the track and rollers extend roller life significantly. When rollers begin to show wear — the door becomes harder to slide or develops a rough, grinding feel — replacement rollers are available for most impact sliding door products and are a straightforward repair that restores smooth operation.

Can sliding glass doors be left partially open?

Yes — sliding doors can be stopped at any position in their travel and left partially open for ventilation. A security bar placed in the floor track prevents the door from being opened further from the exterior while partially open, providing both ventilation and security. For impact sliding doors used in conjunction with accordion shutters (on properties that have both), the shutter track position must accommodate the sliding door's operation — we confirm compatibility during the assessment when both products are involved.

What is the best sliding door for a balcony in a Fort Lauderdale condo?

Condominium balcony sliding door replacements in Fort Lauderdale require impact-rated products meeting the design pressure requirements for the building's height and location. Upper-floor balcony doors carry higher design pressure requirements than ground-floor applications. We specify the correct impact product and NOA documentation for each condominium application and coordinate with the HOA and building department on the permit and approval process. For condo applications, we also discuss access constraints — elevator restrictions, parking access — that affect how products are delivered and installed in occupied buildings.

Do I need HOA approval to replace sliding glass doors in a condo?

In most Fort Lauderdale condominium associations, replacement of balcony sliding glass doors requires HOA architectural committee approval before installation. The approval process typically requires submission of the product specifications, color matching to the building's approved exterior color scheme, and confirmation of impact compliance. Planet Construction FL prepares the documentation package required for HOA approval submission as part of our condo window and door replacement process.

IMPACT GLAZING ESTIMATE • DIRECT RESPONSE

Get Your Sliding Glass Door Installation in Fort Lauderdale Quote & Consultation

Request on-site laser measurements, product sample demonstrations, or line-item quotes for your building. Fully permitted under CGC1517295.

Direct consultation with Licensed Qualifier John Kraja
Dual State Licensed: CGC1517295 (General) • CCC1329271 (Roofing)
Zero Subcontractor Hand-offs • Certified Factory Glazing Installers
Direct Engineering Line
(754) 301-6747
Mon–Sun: 8:00 AM – 8:00 PM (7 Days a Week)
Zero spam promise. Your information is delivered directly to our field estimation team.