STUCCO ENVELOPE
STUCCO & MASONRY
Stucco & Lath Remediation
Chipping delaminations, installing galvanized lath, and applying fiberglass-reinforced scratch and brown coats.
Request Detailed Quote →
FACADE RESTORATION • DIV 09
FL CGC1517295 • CCC1329271
Brick & Masonry Repair in Fort Lauderdale, FL
Brick and masonry damage in Florida is usually a moisture problem at heart. We repair brick walls, columns, and masonry features in Fort Lauderdale with techniques that respect the original work.
FBC Chapter 14
Weather-Resistant Envelope
ICRI CSP 1-3 Profile
Decontaminated Adhesion
100% In-House Crews
Dual-Licensed Quality
FL STATE LICENSED
CGC1517295 • CCC1329271
100%
In-House Crews • Zero Brokers
BUILDING ENVELOPE RESTORATION • FIELD EXPERTISE
Brick and Masonry Repairs That Match and Last
Brick and masonry repair in Fort Lauderdale addresses a building material that is simultaneously one of the most durable and one of the most moisture-vulnerable systems in South Florida's construction. Brick and masonry block are inherently porous — they absorb water from rainfall, retain it, and allow the slow infiltration that eventually reaches the building interior or the embedded reinforcement that holds masonry structures together. Fort Lauderdale's salt air, intense rainfall, and thermal cycling accelerate masonry mortar joint deterioration and produce the efflorescence, cracking, and moisture infiltration that masonry maintenance programs are designed to prevent. At Planet Construction FL, we repair brick and masonry throughout Broward County — restoring mortar joints, addressing cracks, and waterproofing masonry surfaces to defend against South Florida's climate.
Structural Stucco & Lath Repair
Eliminating hollow, delaminated stucco, replacing corroded corner beads, and applying polymer mortars.
Joint Caulking & Flashing Integration
High-grade polyurethane and silicone expansion joint seals blocking wind-driven rain penetration.
Dual-Licensed Permitting & Execution
General Contractor (CGC1517295) and Roofing Contractor (CCC1329271) single-source warranty accountability.
Field Failure Reality • Envelope Degradation
Failing Mortar Joints Take Down Whole Walls
Mortar joints are the weakest point of any masonry wall, and once they start to fail, water gets in fast — saturating brick, freezing nothing in Florida but corroding embedded ties, growing efflorescence, and slowly destabilizing the whole assembly. Bad repairs with the wrong mortar mix make the problem worse by trapping moisture and damaging the surrounding brick. Masonry is unforgiving of shortcuts.
Mandatory Building Department Benchmark • FBC Standards
Engineered Protocol • Quality Assurance
Repointing and Repair Done With the Right Materials
We repair brick and masonry in Fort Lauderdale by matching mortar mixes to the original work, repointing failed joints properly, replacing damaged units where needed, and addressing the underlying moisture sources that caused the failure in the first place. The repairs blend with the existing wall and last for decades. The result is a masonry surface that's structurally sound and visually correct.
Fully documented for engineer of record milestone recertification file
COMMERCIAL • MULTI-FAMILY • RESIDENTIAL
Masonry Repair Services We Provide
Planet Construction FL provides the full scope of brick and masonry repair services for Fort Lauderdale's residential, commercial, and institutional buildings. Tuckpointing and repointing — removing deteriorated mortar from brick and block joints to a specified depth and replacing it with fresh mortar that restores the joint's structural and weather-resistant function. Crack repair — routing and sealing mortar cracks with compatible repair materials or epoxy injection for structural crack bonding where load transfer is the repair objective. Spall repair on masonry block surfaces — restoring the face of damaged masonry units with cementitious repair mortars. Efflorescence treatment — cleaning white mineral deposits from masonry surfaces and addressing the moisture source that drives them. Masonry waterproofing — applying penetrating silane or siloxane sealers to masonry surfaces that reduce water absorption without altering the masonry's appearance. And full masonry wall reconstruction — rebuilding sections of failed masonry where deterioration has progressed beyond repair.
STUCCO ENVELOPE
WATERPROOF COATINGS
ELASTOMERIC SYSTEMS
Commercial High-Rise Painting
100% acrylic elastomeric high-build coatings bridging dynamic hairline cracks and stopping salt air infiltration.
View Coating Systems →
BALCONY RESTORATION
CONDO BALCONIES
Balcony & Walkway Overhauls
Concrete slab edge repair, railing post core drilling, pocket grouting, and non-slip pedestrian traffic membranes.
Inquire About Balconies →
JOINT INTEGRITY
SEALANTS & CAULKING
Perimeter & Expansion Seals
Complete removal of degraded sealants, installing backer rod, and tooling Class 50 polyurethane expansion joints.
Explore Joint Caulking →
DECONTAMINATION
PRESSURE WASHING
Facade Cleaning & Descaling
Commercial 3,500+ PSI rotary hot-water wash, efflorescence acid neutralizers, and biological algae treatment.
Inquire About Cleaning →
PAVEMENT SYSTEMS
PAVEMENT REPAIRS
Parking Lot & Walkway Paving
Full asphalt sealcoating, asphalt pothole patching, ADA concrete ramp construction, and thermoplastic stall line striping.
Request Pavement Bid →
Regulatory Code Standards • FBC & ASTM Compliance
Tuckpointing & Repointing for Fort Lauderdale Buildings
Tuckpointing — also called repointing — is the process of removing deteriorated mortar from masonry joints and replacing it with fresh mortar that restores the joint's integrity. Mortar joints in Fort Lauderdale's masonry buildings deteriorate through weathering — rain erosion, thermal cycling, and the freeze-thaw that rarely occurs in Fort Lauderdale but whose equivalent stresses are produced by the rapid temperature swings during cold fronts. Deteriorated joints allow water to enter the masonry wall, migrating behind the face brick or block to the interior wythe and structural components. In Fort Lauderdale's older brick buildings — common in commercial and institutional construction from the early through mid-20th century — tuckpointing is a critical maintenance item that preserves the structural integrity and moisture resistance of the masonry wall system. We remove deteriorated mortar to a minimum depth of 3/4 inch — sufficient to provide a mechanical key for the new mortar — using hand tools that avoid damage to the brick face, then pack and finish the new mortar to match the existing joint profile.
Licensed CGC1517295 • CCC1329271 Execution
Direct Engineer of Record Special Inspections
Facade Verification Criteria
SURFACE PREPARATION PROTOCOL
ICRI CSP 1–3 & Decontamination
3,500+ PSI pressure washing, efflorescence neutralizer, and mechanical scraping.
MATERIAL SPECIFICATION
ASTM D412 >300% Elongation
High-build 100% acrylic elastomeric with 20-mil wet film thickness.
LEGAL COMPLIANCE
FBC Chapter 14 Envelope Standard
HVHZ wind-driven rain protection and sealed perimeter expansion joints.
FIELD APPLICATION SPECIFICATIONS
Brick Waterproofing for South Florida
Brick and masonry block absorb water by design — their porous structure is part of what makes them effective building materials. But in Fort Lauderdale's climate, uncontrolled water absorption through masonry surfaces leads to interior moisture problems, efflorescence staining, freeze-thaw damage (rare but possible during cold fronts), and in reinforced masonry block construction, the rebar corrosion that produces the same spalling and deterioration that affects concrete buildings throughout South Florida. Penetrating silane or siloxane sealers are applied to masonry surfaces to line the pores with a hydrophobic barrier that repels water without trapping moisture vapor within the masonry — an important distinction in South Florida's humid climate where vapor-trapping coatings cause more problems than they solve. Planet Construction FL applies masonry sealers as part of masonry repair projects and as standalone preventive maintenance services for Fort Lauderdale buildings with brick or block exterior walls.
01
High-pressure wash removing chalk, dirt, and salts. Complete scrape of loose coatings and biocide treatment.
02
Chipping spalls, treating rebar, patching stucco with polymer mortar, and tooling polyurethane into all joints.
03
Deep-penetrating masonry conditioner locking down chalk, followed by alkaline-resistant primer for maximum adhesion.
04
Multi-coat cross-hatch application achieving calibrated 16–20 mil dry film build with 10-year warranty protection.
Commercial Asset Managers • HOA Boards
Crack & Mortar Restoration
Masonry cracks in Fort Lauderdale's buildings range from hairline mortar joint cracks that are primarily moisture infiltration risks to through-cracks in masonry walls that represent structural concerns requiring engineering assessment. Hairline mortar cracks are addressed by routing the crack face, cleaning, and applying a compatible mortar or sealant material that bridges the crack and restores water resistance. Wider structural cracks in masonry walls — horizontal cracks indicating lateral pressure, diagonal cracks indicating differential settlement — require engineering assessment before repair approach is determined. Carbon fiber strap reinforcement can be used to resist ongoing lateral pressure in masonry walls where the load causing the crack can't be eliminated. Planet Construction FL classifies masonry cracks by type and severity in our condition assessment report and recommends the repair approach appropriate to each crack's specific characteristics.
Multi-Unit Program Support
Phased construction logistics, resident notices, reserve study alignment, and direct engineer of record milestone recertification sign-offs.
HOA Board Presentation Packages & Milestone Recertification Decks
Multi-Year Capital Expenditure Phasing to Mitigate Special Assessments
Request Program Proposal
Direct Qualifier CGC1517295 • No Obligation Board Review
RECENT REGIONAL PERFORMANCE • VERIFIED SITES
Documented Exterior Restoration Projects • South Florida Portfolio
Engineering-compliant high-build elastomeric applications, stucco restoration, and building envelope remediation across Broward and Palm Beach counties.
POMPANO BEACH • COMMERCIAL
Commercial Plaza Facade Restoration
Full pressure wash, crack-bridging elastomeric coating, and high-durability acrylic enamel on storefront architectural elements.
FORT LAUDERDALE BEACH • CONDO TOWER
Coastal High-Rise Tower Recoating
Swing stage exterior remediation, structural stucco patching, and salt-shield elastomeric waterproofing across 12 oceanfront residential floors.
BOCA RATON • HOA COMMUNITY
Multi-Building HOA Exterior Overhaul
Multi-year capital phasing program covering 6 condominium buildings, stucco crack repairs, and 100% acrylic elastomeric coatings.
FIELD EXPERTISE • CLARITY FOR OWNERS & BOARDS
Frequently Asked Questions • Exterior Restoration
Direct answers on stucco warranties, recertification compliance, coating longevity, and logistics across South Florida.
How do I know if masonry mortar joints need repointing?
Visual indicators that mortar joints need repointing include visible gaps or voids in the joint where mortar has eroded away, mortar that can be removed by light probing with a screwdriver or key, horizontal water staining on interior walls adjacent to exterior masonry, and efflorescence on the masonry exterior face. As a general maintenance guideline, masonry mortar joints in Fort Lauderdale's climate should be inspected every 5–7 years and repointed where deterioration is detected — periodic repointing is far less expensive than the structural and moisture damage that fully deteriorated joints allow.
Can you match existing mortar color and texture?
Mortar color and texture matching is part of every tuckpointing project we undertake. New mortar will always appear lighter than weathered mortar immediately after installation — this is unavoidable, as the color change from weathering takes years to replicate. We select the closest available mortar color to the existing joint and discuss the expected initial color contrast with the property owner before work begins. For historic buildings where mortar color matching is critical, we can obtain mortar analysis services to identify the original mortar composition and replicate it precisely.
Is brick repair covered by homeowner's insurance?
Brick and masonry repair resulting from sudden, covered perils — storm damage, vehicle impact — may be covered under property insurance. Gradual deterioration from normal weathering is typically an exclusion. We provide documentation of storm-related masonry damage for insurance claims when the damage timeline aligns with a covered weather event.
How long does masonry repair last?
Quality tuckpointing with properly specified and mixed mortar lasts 20–30 years in Fort Lauderdale's climate before repointing is needed again — comparable to the original mortar's service life in most cases. Mortar crack repairs with compatible materials similarly provide durable results when the underlying cause of cracking has been addressed. Penetrating masonry sealers last 5–10 years before reapplication is beneficial. We provide maintenance guidance for each masonry repair project to help property owners maintain the repaired masonry effectively over its full service life.
FACADE RESTORATION ESTIMATE • DIRECT RESPONSE
Get Your Brick & Masonry Repair in Fort Lauderdale, FL Inspection & Proposal
Request a comprehensive exterior building evaluation, drone facade scan, or line-item HOA board proposal. All scopes executed under dual state licenses.
Direct consultation with Licensed Qualifier John Kraja
Dual State Licensed: CGC1517295 (General) • CCC1329271 (Roofing)
Zero Subcontractor Hand-offs • 100% In-House Field Crews