MULTI-SLIDE DOORS
Impact Sliding Glass Doors
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →Your front door sets the tone for your entire home. We install luxury impact-rated entry doors that combine custom design with hurricane-grade performance.
Luxury front entry door installation in Fort Lauderdale makes a statement before a single word is spoken. In a market where curb appeal directly affects property values and where Fort Lauderdale's architectural diversity spans Mediterranean Revival, Mid-Century Modern, and contemporary waterfront design, the front entry door is the most visible expression of a home's character and investment level. At Planet Construction FL, we source and install luxury entry doors — iron, fiberglass, and custom glass designs — that are as protective as they are beautiful, meeting Florida's HVHZ impact requirements while delivering the commanding presence that Fort Lauderdale's finest homes demand.
Engineered sub-buck installation with 5/16" stainless Tapcon masonry anchors meeting high-pressure wind envelopes.
Multi-layer impact glass resistant to 9-lb 2x4 projectile strikes at 50 feet per second (Large Missile D).
General Contractor (CGC1517295) and Roofing Contractor (CCC1329271) single-source warranty accountability.
Custom front doors that aren't impact-rated, properly installed, or built for Florida conditions become problems fast — warping, leaking, hardware failure, and storm vulnerability. Most luxury doors sold without specialty installation experience end up underperforming because the install didn't match the product's quality.
We work with luxury impact-rated entry door manufacturers, helping you select designs that fit your home and your taste. Installation includes proper structural prep, precision anchoring, weather-tight sealing, and complete permits. Every door is finished, hardware-tested, and documented. The result is an entry that makes a statement — and lasts.
Fort Lauderdale's luxury residential market supports a wide range of entry door aesthetics, each suited to different architectural styles. Wrought iron doors — either solid iron or iron-framed with glass infill panels — bring a distinctive Old World character appropriate for Fort Lauderdale's Mediterranean and Spanish Colonial homes, and their inherent weight and strength lend themselves naturally to impact-rated construction. Contemporary fiberglass doors with clean lines, full-glass sidelite panels, and minimal hardware profiles suit Fort Lauderdale's modern waterfront and transitional architecture. Mahogany and other tropical hardwood entry doors provide warmth and natural beauty for traditional and coastal cottage styles, typically protected with aluminum exterior cladding for durability in South Florida's humidity. Custom glass-and-metal pivot doors are the signature entry statement of Fort Lauderdale's most contemporary luxury residences.
MULTI-SLIDE DOORS
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →
IMPACT WINDOWS
Energy-efficient Low-E insulated glass packages with argon fill, heavy sashes, and stainless multipoint hardware.
View Window Systems →
ARCHITECTURAL DOORS
Custom oversized impact entrance systems combining high security, three-point deadbolts, and designer finishes.
Inquire About Doors →
COMMERCIAL GLAZING
Thermally broken heavy-gauge commercial framing, panic hardware, and impact glass for retail and plazas.
Explore Commercial Glass →
STORM SHUTTERS
Extruded aluminum curved blades, keyed center locks, and Somfy motorized roll-down systems for wide lanais.
Inquire About Shutters →
GARAGE DOORS
Reinforced steel strut backings, heavy-duty commercial track assemblies, and insulated quiet openers.
Request Garage Bid →Each luxury entry door material has genuine strengths and limitations in Fort Lauderdale's coastal environment. Iron doors are extraordinarily durable and provide the greatest impression of weight and permanence, but require appropriate finishing to prevent rust in South Florida's salt air and humidity — quality powder-coat finishes over properly primed iron provide excellent long-term corrosion resistance. Fiberglass doors are the most climate-tolerant option — they don't rust, swell, warp, or require repainting on any fixed schedule, and modern fiberglass products can convincingly replicate the appearance of wood grain at a fraction of real wood's maintenance demands. Wood and wood-clad doors provide genuine material warmth that fiberglass and iron cannot fully replicate, but require regular refinishing in South Florida's UV and humidity environment to prevent fading, cracking, and moisture damage. We discuss material choice honestly for each project based on the desired aesthetic, maintenance tolerance, and budget.
Every exterior door we install in Fort Lauderdale — including luxury entry doors — must be impact-rated and NOA-compliant for Broward County's HVHZ designation. This requirement is particularly important for entry doors because entry door openings are typically larger than window openings, carry higher total wind load, and are subject to specific Florida Building Code structural requirements for door frames and anchoring. Many luxury entry door products — particularly custom iron and wood designs — are available in impact-rated configurations with laminated glass panels, reinforced frames, and hardware tested to the applicable design pressure standards. Where a desired luxury product is not available in a code-compliant impact configuration, we work with the customer to find the closest compliant alternative or specify a supplemental protection method.
Precision laser opening measurements, wind pressure calculations, and city permit package submittal.
Sub-buck inspection, rot replacement with pressure-treated lumber, and liquid waterproof sill flashing.
Setting heavy-gauge aluminum frames plumb, leveling sills, and securing Tapcons into concrete block.
Tooling continuous polyurethane perimeter expansion joints and passing final municipal building inspection.
Luxury entry door installations at Planet Construction FL go beyond product selection. We source custom-designed doors from specialized manufacturers — including hand-forged iron work, custom pivot door systems, and bespoke glass panel configurations — and manage the full installation including structural preparation of the rough opening, frame anchoring, threshold and weatherseal installation, and hardware mounting. Security features in luxury entry doors include multi-point locking systems that engage the frame at 3–7 points along the door height, commercial-grade deadbolts, reinforced strike plates, and in some applications, smart lock integration with keypad or biometric entry systems. The entry door is typically the most-photographed element of a Fort Lauderdale luxury home, and we approach each installation with the attention to detail that a featured architectural element demands.
Phased window installation schedules, resident notifications, HOA board architectural review submittals, and clean master permitting.
Engineering-compliant impact windows, sliding glass door retrofits, and commercial storefront assemblies across Broward and Palm Beach counties.
Custom bronze anodized French patio impact doors with multi-point locking and laminated Low-E energy glass.
Turnkey replacement of 120 sliding glass balcony doors and casement windows engineered for high-altitude wind loads.
Commercial storefront aluminum framing with impact-rated laminate safety glass and commercial ADA entry doors.
Direct answers on NOA ratings, insurance premium reductions, installation lead times, and financing options in South Florida.
Luxury entry door installation in Fort Lauderdale ranges from approximately $5,000 for a quality fiberglass entry door with sidelites, up to $25,000 and beyond for custom iron, pivot, or full-glass entry systems with premium hardware. The wide range reflects the extraordinary diversity in product complexity and custom fabrication involved. We provide a detailed written proposal for each project after the initial consultation, with options at different investment levels that achieve the desired design outcome.
Standard luxury door installations — fiberglass or iron doors from existing product lines — take 1–2 days for installation after permit approval and product delivery. Custom-fabricated doors require 6–14 weeks of lead time for fabrication before installation scheduling. We confirm the full project timeline — permit, fabrication, installation — at the proposal stage so the schedule is clear before commitment.
Yes — all exterior doors in Fort Lauderdale and Broward County must meet Florida Building Code HVHZ requirements for impact resistance and design pressure. This includes luxury entry doors regardless of their aesthetic or price point. We only install entry doors with valid Florida NOA documentation. If a specific custom or luxury door product you have in mind is not NOA-compliant, we discuss compliant alternatives or supplemental protection approaches at the design consultation.
Yes — a luxury entry door upgrade is consistently one of the highest-return home improvement investments in Fort Lauderdale's market. First impressions drive perceived value in real estate, and a distinctive, high-quality entry door communicates investment level to potential buyers before they step inside. In Fort Lauderdale's luxury segment, where buyers are comparing properties with similar square footage and amenities, a memorable entry door can be a decisive differentiating factor.
Request on-site laser measurements, product sample demonstrations, or line-item quotes for your building. Fully permitted under CGC1517295.