MULTI-SLIDE DOORS
Impact Sliding Glass Doors
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →Roll-down shutters are the most convenient hurricane protection — push a button and your home is sealed. We install motorized roll-down systems built for daily use and storm performance.
Roll-down hurricane shutters in Fort Lauderdale deliver the cleanest appearance of any shutter type — and in motorized configurations, the easiest operation. When not in use, the shutter curtain retracts completely into a compact housing box above the opening, leaving the window or door fully visible with no folded panels or stacked blades in view. When deployment is needed — or when you want daytime privacy or nighttime security — the shutter rolls down smoothly, either by turning a hand crank or pressing a button on a remote or wall switch. At Planet Construction FL, we install roll-down shutter systems for residential and commercial properties throughout Fort Lauderdale.
Engineered sub-buck installation with 5/16" stainless Tapcon masonry anchors meeting high-pressure wind envelopes.
Multi-layer impact glass resistant to 9-lb 2x4 projectile strikes at 50 feet per second (Large Missile D).
General Contractor (CGC1517295) and Roofing Contractor (CCC1329271) single-source warranty accountability.
Even good shutter systems get skipped when they're inconvenient — especially as homeowners age or storms come on quickly. Manual systems often go unused exactly when the home needs protection most. The result is unprotected windows during real storms.
We install roll-down shutters with reliable motors, battery backup, and either remote or manual override controls. Each system is engineered for the opening, properly anchored, and tested under load. The result is push-button hurricane protection that's actually ready every time.
Roll-down shutters consist of interlocking aluminum slats that coil onto a barrel axle housed in a box mounted above the window or door opening. Guide rails are mounted on both sides of the opening, and the shutter curtain travels within these rails as it deploys or retracts. Manual roll-down systems use a hand crank or a spring-assist mechanism for operation — the spring assist reduces the force required for larger, heavier shutter curtains. Motorized systems use a tubular motor inside the barrel axle, controlled by a wall switch, wireless remote, or building automation system. When fully deployed, the bottom bar of the shutter engages locking pins in the guide rails that hold the shutter in position against wind pressure — providing the structural rigidity that hurricane ratings require.
MULTI-SLIDE DOORS
Heavy-gauge aluminum multi-slide panels with tandem stainless rollers and water-rated sill risers.
Request Detailed Quote →
IMPACT WINDOWS
Energy-efficient Low-E insulated glass packages with argon fill, heavy sashes, and stainless multipoint hardware.
View Window Systems →
ARCHITECTURAL DOORS
Custom oversized impact entrance systems combining high security, three-point deadbolts, and designer finishes.
Inquire About Doors →
COMMERCIAL GLAZING
Thermally broken heavy-gauge commercial framing, panic hardware, and impact glass for retail and plazas.
Explore Commercial Glass →
STORM SHUTTERS
Extruded aluminum curved blades, keyed center locks, and Somfy motorized roll-down systems for wide lanais.
Inquire About Shutters →
GARAGE DOORS
Reinforced steel strut backings, heavy-duty commercial track assemblies, and insulated quiet openers.
Request Garage Bid →The choice between motorized and manual roll-down shutters comes down to convenience versus cost. Manual systems are mechanically simple and less expensive — but for large openings and for properties with many shutters to deploy, manual operation is physically demanding and time-consuming. Motorized systems allow all shutters on the property to be deployed from a single wall panel or remote control — or increasingly, from a smartphone app — in the time it takes to walk through the house pressing buttons. For large commercial applications, high-rise properties, and Fort Lauderdale's frequent absentee homeowner situation, motorized roll-down shutters are the preferred solution. Motorized systems can also be programmed on timers — scheduling daily privacy closure at night and opening at sunrise — making them a functional privacy and security tool beyond just storm protection.
Roll-down shutters provide meaningful security and privacy benefits beyond hurricane protection that many Fort Lauderdale property owners actively use. A fully deployed roll-down shutter presents a solid aluminum barrier to forced entry — dramatically more difficult to breach than a standard window or sliding glass door. For vacation properties and seasonal residences, roll-down shutters deployed during vacancy provide a visible deterrent to break-ins and protect against both opportunistic and targeted property crimes. Privacy mode — closing shutters partially to diffuse light and block views from outside while maintaining interior lighting — is used routinely by full-time Fort Lauderdale residents who want daytime privacy without closing their shutters completely. Motorized systems make these routine uses effortless.
Precision laser opening measurements, wind pressure calculations, and city permit package submittal.
Sub-buck inspection, rot replacement with pressure-treated lumber, and liquid waterproof sill flashing.
Setting heavy-gauge aluminum frames plumb, leveling sills, and securing Tapcons into concrete block.
Tooling continuous polyurethane perimeter expansion joints and passing final municipal building inspection.
Roll-down shutter installation requires adequate wall space above the window or door opening for the housing box — typically 8–14 inches of height above the top of the frame, depending on the shutter curtain length and barrel diameter. This space requirement must be confirmed during the site assessment — some architectural designs with tight overhead clearances require modified housing box configurations or preclude roll-down shutters for specific openings. Guide rails are anchored to the wall flanking the opening in structural masonry or framing. Motorized systems require an electrical connection at the housing box location — we coordinate with a licensed electrician for the electrical rough-in if it is not already in place. All installations are permitted and inspected per Broward County building department requirements.
Phased window installation schedules, resident notifications, HOA board architectural review submittals, and clean master permitting.
Engineering-compliant impact windows, sliding glass door retrofits, and commercial storefront assemblies across Broward and Palm Beach counties.
Custom bronze anodized French patio impact doors with multi-point locking and laminated Low-E energy glass.
Turnkey replacement of 120 sliding glass balcony doors and casement windows engineered for high-altitude wind loads.
Commercial storefront aluminum framing with impact-rated laminate safety glass and commercial ADA entry doors.
Direct answers on NOA ratings, insurance premium reductions, installation lead times, and financing options in South Florida.
Most motorized roll-down shutter motors include a manual override — a removable crank that allows the shutter to be operated without power. Battery backup systems are available as upgrades that allow full motorized operation for a defined number of cycles on a charged battery — ensuring the shutters can be deployed and retracted even if grid power is lost before or during a storm. For properties in Fort Lauderdale where power outages during storm season are a realistic concern, we recommend battery backup as a standard feature on motorized shutter systems.
Individual roll-down shutter installations for a single window or door take approximately half a day for installation. A whole-home installation with 8–12 openings typically takes 2–3 days. Motorized systems require a separate electrical rough-in and trim-out — adding approximately half a day of electrical work to the overall schedule. As with all shutter types, product fabrication and permit approval add 6–10 weeks to the total project timeline from contract to installation completion.
Yes — roll-down shutters are installed on windows and doors at any floor level. Upper-floor installations require scaffolding or aerial lift equipment for safe access during installation, which is factored into the project cost. The structural anchor requirements for upper-floor installations — which carry higher design pressure requirements than ground-floor openings — are confirmed during the site assessment and specified in the permit documentation.
Quality roll-down shutters with proper guide rail installation and bottom bar engagement produce minimal wind noise when deployed. The interlocking slats reduce wind-induced vibration when the bottom bar is properly locked in the guide rails. Loose or improperly locked shutters can rattle in wind — proper installation and the end-of-season inspection we recommend prevents this from developing over time.
Request on-site laser measurements, product sample demonstrations, or line-item quotes for your building. Fully permitted under CGC1517295.